THE HUB

The Hub/BIAMP/DSP/TesiraFORTE VI

BIAMP, DSP

TesiraFORTE VI

Control
IP, RS-232 (default TCP)
Encoding
ASCII
IP
Telnet port 23
RS-232
115200 baud, 8N1
Line ending
LF
Roles
DSP

Commands

14 commands
VOLUME6
VOLUME UP Level1 increment level %o 2
Reply: +OKVariables: %o = speaker output channel (1..8); +2 dB stepEnding: lf
VOLUME DOWN Level1 decrement level %o 2
Reply: +OKVariables: %o = speaker output channel (1..8); -2 dB stepEnding: lf
VOLUME SET Level1 set level %o %v
Reply: +OKVariables: %o = speaker output channel (1..8); %v = gain in dB (-100..12)Ending: lf
MIC VOLUME UP MicLevel1 increment level %n 2
Reply: +OKVariables: %n = mic input channel (1..12); +2 dB stepEnding: lf
MIC VOLUME DOWN MicLevel1 decrement level %n 2
Reply: +OKVariables: %n = mic input channel (1..12); -2 dB stepEnding: lf
MIC VOLUME SET MicLevel1 set level %n %v
Reply: +OKVariables: %n = mic input channel (1..12); %v = gain in dB (-100..12)Ending: lf
OTHER2
GET VOLUME Level1 get level %o
Reply: +OK "value":%vVariables: %o = speaker output channel (1..8); %v = gain in dB (-100..12)Ending: lf
GET MIC VOLUME MicLevel1 get level %n
Reply: +OK "value":%vVariables: %n = mic input channel (1..12); %v = gain in dB (-100..12)Ending: lf
MUTE6
MUTE TOGGLE Level1 toggle mute %o
Reply: +OKVariables: %o = speaker output channel (1..8); toggles mute stateEnding: lf
MUTE ON Level1 set mute %o true
Reply: +OKVariables: %o = speaker output channel (1..8); true = mute onEnding: lf
MUTE OFF Level1 set mute %o false
Reply: +OKVariables: %o = speaker output channel (1..8); false = mute offEnding: lf
MIC MUTE TOGGLE MicLevel1 toggle mute %n
Reply: +OKVariables: %n = mic input channel (1..12); toggles mic mute stateEnding: lf
MIC MUTE ON MicLevel1 set mute %n true
Reply: +OKVariables: %n = mic input channel (1..12); true = mute onEnding: lf
MIC MUTE OFF MicLevel1 set mute %n false
Reply: +OKVariables: %n = mic input channel (1..12); false = mute offEnding: lf

Cheat sheet

driver.cheatSheet()

What it is

The Biamp TesiraFORTE VI is a fixed-I/O 12x8 digital audio signal processor with AEC, VoIP conferencing, and USB audio. It is controlled via the Biamp Tesira Text Protocol (TTP) over Telnet TCP port 23 or RS-232 at 115200 baud.

Specs

Size: 1RU rack-mount

Type: Fixed-I/O 12x8 conferencing DSP (AEC, VoIP conferencing, and USB audio)

Inputs: 12 mic/line inputs with AEC, VoIP, 8 analog outputs, USB audio

Mounting: 19-inch 1RU rack-mount

Setup

First Use: Configure Level1 (speaker outputs 1-8) and MicLevel1 (mic inputs 1-12) instance tags in Biamp Tesira software before connecting.

Control: Biamp Tesira Text Protocol (TTP) over Telnet TCP port 23 or RS-232 at 115200 8N1 (LF terminated). Responses end with +OK or -ERR.

Support

Power Cycle: Disconnect AC power for ten seconds, then reconnect.

Factory Reset: Refer to the Biamp TesiraFORTE hardware installation guide.

About this driver

driver.source()

Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.

Revision
1
Updated
2026-11-18
Catalog date
2026-11-18
License
CC-BY-4.0