THE HUB

The Hub/EXTRON/DSP/DMP 128 Plus AT

EXTRON, DSP

DMP 128 Plus AT

Control
IP, RS-232 (default TCP)
Encoding
ASCII
IP
Telnet port 23
RS-232
9600 baud, 8N1
Line ending
CR
Roles
DSP

Commands

14 commands
VOLUME6
VOLUME UP \x1BD%o*10+GRPM
Reply: GrpmD%o*%v]Variables: %o = speaker zone group master (1..8); +10 tenths (+1.0 dB) step; %v = resulting levelEnding: cr
VOLUME DOWN \x1BD%o*10-GRPM
Reply: GrpmD%o*%v]Variables: %o = speaker zone group master (1..8); -10 tenths (-1.0 dB) step; %v = resulting levelEnding: cr
VOLUME SET \x1BD%o*%vGRPM
Reply: GrpmD%o*%v]Variables: %o = speaker zone group master (1..8); %v = gain in 0.1 dB tenths (-1000..0)Ending: cr
MIC VOLUME UP \x1BD%n*10+GRPM
Reply: GrpmD%n*%v]Variables: %n = mic channel group master (9..20); +10 tenths (+1.0 dB) step; %v = resulting levelEnding: cr
MIC VOLUME DOWN \x1BD%n*10-GRPM
Reply: GrpmD%n*%v]Variables: %n = mic channel group master (9..20); -10 tenths (-1.0 dB) step; %v = resulting levelEnding: cr
MIC VOLUME SET \x1BD%n*%vGRPM
Reply: GrpmD%n*%v]Variables: %n = mic channel group master (9..20); %v = gain in 0.1 dB tenths (-1000..0)Ending: cr
OTHER4
GET VOLUME \x1BD%oGRPM
Reply: %v]Variables: %o = speaker zone group master (1..8); %v = gain in 0.1 dB tenths (-1000..0)Ending: cr
GET MUTE \x1BD%oGRPM
Reply: %v]Variables: %o = speaker zone group master (1..8); %v = mute state (0=unmuted, 1=muted)Ending: cr
GET MIC VOLUME \x1BD%nGRPM
Reply: %v]Variables: %n = mic channel group master (9..20); %v = gain in 0.1 dB tenths (-1000..0)Ending: cr
GET MIC MUTE \x1BD%nGRPM
Reply: %v]Variables: %n = mic channel group master (9..20); %v = mute state (0=unmuted, 1=muted)Ending: cr
MUTE4
MUTE ON \x1BD%o*1GRPM
Reply: GrpmD%o*+00001]Variables: %o = speaker zone group master (1..8); 1 = mute onEnding: cr
MUTE OFF \x1BD%o*0GRPM
Reply: GrpmD%o*+00000]Variables: %o = speaker zone group master (1..8); 0 = mute offEnding: cr
MIC MUTE ON \x1BD%n*1GRPM
Reply: GrpmD%n*+00001]Variables: %n = mic channel group master (9..20); 1 = mute onEnding: cr
MIC MUTE OFF \x1BD%n*0GRPM
Reply: GrpmD%n*+00000]Variables: %n = mic channel group master (9..20); 0 = mute offEnding: cr

Cheat sheet

driver.cheatSheet()

What it is

The Extron DMP 128 Plus AT (SKU 60-1511-10) is a 12x8 ProDSP digital matrix processor with Dante and AES67 audio networking. It is controlled via Extron SIS commands over Telnet TCP port 23 or RS-232 at 9600 baud.

Specs

Size: 1RU rack-mount

Type: 12x8 ProDSP digital matrix processor (SKU 60-1511-10)

Inputs: 12 mic/line inputs, 8 outputs, Dante/AES67

Mounting: 19-inch 1RU rack-mount

Setup

First Use: Configure Group Masters 1-8 (speaker zones) and 9-20 (microphones) in Extron DSP Configurator before connecting.

Control: Extron SIS Group Master (GRPM) commands over Telnet TCP port 23 or RS-232 at 9600 8N1 (CR terminated). Gain values use 0.1 dB tenths (-1000 to 0).

Support

Tech Support Phone: 800.633.9876 (Extron S3 Support Hotline)

Power Cycle: Disconnect AC power for ten seconds, then reconnect.

Factory Reset: Refer to the Extron DMP 128 Plus Series User Guide.

About this driver

driver.source()

Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.

Revision
1
Updated
2026-11-18
Catalog date
2026-11-18
License
CC-BY-4.0