SYMETRIX, DSP
SYMETRIX, DSP
CC %o 1 1310
CC %o 0 1310
CS %o %v
CC %n 1 1310
CC %n 0 1310
CS %n %v
GS %o
GS %n
CS 10%o 65535
CS 10%o 0
CS 20%n 65535
CS 20%n 0
The Symetrix Jupiter 8 (SKU 80-0037) is an app-based 8x8 fixed-architecture digital signal processor with 4x4 GPIO and ARC-WEB support. It is controlled via the Symetrix Composer Control Protocol over TCP port 48631 or RS-232 at 38400 baud.
Size: 1RU rack-mount
Type: 8x8 app-based fixed-architecture DSP (SKU 80-0037)
Inputs: 8 mic/line inputs, 8 analog outputs, 4x4 GPIO
Mounting: 19-inch 1RU rack-mount
First Use: Load a Jupiter app and assign controller numbers for output gain (%o), output mute (10%o), and mic mute (20%n) in Symetrix Jupiter software.
Control: Symetrix Composer Control Protocol (CS/CC/GS) over TCP port 48631 or RS-232 at 38400 8N1 (CR terminated). Levels use 16-bit values (0..65535).
Power Cycle: Disconnect AC power for ten seconds, then reconnect.
Factory Reset: Refer to the Symetrix Jupiter hardware manual.
Confirm each command on your device before you rely on it. Provided as is, with no warranty. To correct something or ask for it to come down, write to info@ctrlbot.io. Licensed CC BY 4.0: credit CTRLbot and link back when you share it. Product page. Manufacturer site.